Dealing with the process of draining pools requires understanding the steps involved and considering several factors, such as pool size, type, and location, which can affect how you drain your pool. If you’ve ever wondered how to drain a pool, the process is actually quite simple and applies to all types of pools. First, you’ll need to turn off the pump and allow the water level to drop below the skimmer.
Next, remove the skimmer baskets and any other above-ground accessories. Once the water level is low enough, you can begin removing the water with a submersible pump. Having the right tools, such as a submersible pump and hoses, is essential.
Be sure to place the pump at least 10 feet from the pool so that you don’t accidentally suck up any dirt or debris. It’s important to monitor the water level closely to prevent the pump from sucking in air, which can cause damage to the equipment. Also, keep an eye on the area around the discharge hose to prevent pooling or flooding near the drainage site.
Finally, once the pool is empty, you can remove any remaining water with a garden hose. This is a convenient method, especially if you don’t have specialized equipment. You may notice only a few inches of water left at the bottom; you’ll need to remove every last bit manually.
Draining is easier if your pool is located at the top of a hill, as gravity will help the process. To start siphoning, push the hose into the water to fill it, then lower one end outside the pool to start flowing water—the weight of the water helps maintain the flow.
When testing water flow and pressure, maintain control to avoid damage. Just be sure to direct the hose away from any plants or buildings, as the force of the water can easily damage them.
And that’s all there is to it! With a little effort and the right approach to dealing with the draining process, you can easily drain your in-ground pool or any other type of pool.
Preparation for Draining
Before you start draining your pool, taking the right preparatory steps is essential for a smooth and safe process. Whether you have an above ground pool or an inground pool, begin by turning off the pool pump and filtration system completely—this helps prevent any accidental start-ups or equipment damage during draining.
Next, carefully inspect the pool area and choose a suitable location for draining the water. Look for a spot where the ground slopes away from your home and other structures to avoid unwanted flooding. Make sure the path for water flow is clear of obstacles, and check for any potential leaks or weak spots in the line you’ll be using.
If you plan to use a submersible pump, position it securely in the pool and attach the hose, ensuring it reaches your chosen drainage location. For those using the siphon method with a garden hose, create a secure connection and make sure the hose is long enough to reach from the pool to the desired level outside.
To start the siphon, fill the hose with water, then quickly lower one end to the ground to let gravity and pressure start the flow. This method is especially useful if you only need to drain a little water to adjust the water level.
Before you begin, verify that the drain valve is not blocked and that the waste line is clear. Typically, you’ll need to switch your multiport valve to the “Waste” setting to direct water out of the pool. Test the water flow and pressure to ensure it’s controlled and not too strong, which could cause damage to your pool liner or surrounding area.
It’s also important to protect your pool surfaces and equipment during draining. Remove or cover any items that could be damaged by water flow, and check that stairs and other fixtures are secure. Inspect the area for any hazards, such as loose equipment or slippery spots, and address them before you start.
Draining a pool can be a slow process, especially if you’re using a garden hose or siphon method, so plan ahead and be patient. By following these key preparation steps, you’ll help ensure a safe, efficient, and hassle-free draining process, setting your pool up for easy refilling or maintenance when the time comes.
WHAT ARE THE DIFFERENT WAYS TO DRAIN AN INGROUND POOL USING THE SIPHON METHOD
There are several methods for draining a pool, including gravity draining and pump draining. Gravity draining is the simplest method—all you need to do is connect a hose to the drain valve at the bottom of your pool and let the water flow out. Pump draining is slightly more complicated, but still relatively easy.
When using a pump, make sure to set the multiport valve to the correct position, such as 'Waste,' to direct the water out properly. First, you’ll need to attach a sump pump to the drain valve. Then, turn on the pump and let it run until the water level in your pool has lowered significantly. Finally, shut off the pump and disconnect it from the drain valve.
Draining your pool is often done in the spring or at the end of the swimming season for maintenance or cleaning. If you are unsure about the process, consider hiring professional pool draining services to ensure the job is done safely and effectively. Whichever method you choose, be sure to follow these simple steps for a safe and successful drainage!
HOW LONG DOES IT TAKE TO DRAIN AN INGROUND POOL
Draining an inground pool is something that should be done periodically to help extend the life of the pool. Depending on the size of the pool, it can take anywhere from a few hours to a few days to completely drain the pool. Here are a few tips to help make the process go as smoothly as possible:
-Start by draining the water from the pump and filter. This will help reduce the amount of water that needs to be drained from the pool.
-Next, use a submersible pump to remove water from the deep end of the pool. Be sure to position the pump so that it is above the water level so that it doesn't get damaged.
-Once the water level has been reduced, you can begin draining water from the shallow end. A garden hose can be used for this purpose.
-When all of the water has been drained from the pool, be sure to clean it out thoroughly before refilling it. This will help keep your pool in good condition for years to come.
Related articles:
The Safest Way to Store Your Above Ground Pool For Winter
